ame(ame皖能电力股吧 百科)

|大连友谊股吧2021年4月28日发(作者：饿了么?华联股份(000882))

The unit of the signal variables is always
compatible will all other units. It is then possible to connect a null signal to a submodel requiring a variable
having a physical unit, like bar or ms. Note that is such case, the signal is directly transferred without any
unit conversion.
信号变量的单位总是“空”。这个无因次单位的主要优势都将其他单位兼容。然后可以将一个空的信号连接
到子模型需要一个变量物理单位,比如bar或者m s。注意,这种情况下,没有任何单位转换信号直接传输
Even on blocks sending variables corresponding to time, like CLOC0, the output variable has a null unit.
即使在块发送变量对应于时间,像CLOC0,输出变量有一个空单元。

Figure 1: CLOC0 submodel output variable
3. Sources, Sinks
This sub category contains the signal sources and signal sinks.
The source components do not depend on any other input than time, and produce simple or complex signals.
Most source icons consist of a circle containing the type of signal to be delivered.
3。源、汇
这个子目录包含信号和信号接收来源。
源组件不依赖于任何其他比时间输入,并产生简单的或复杂的信号。大多数源图标由一圈包含信号传递的类
型。


Signals can be either continuous (sine wave...) or discrete (square wave...).
Note that some sources like the sine wave SIN0 use to reduce automatically the maximum time step of
the solver. For instance, SIN0 reduces it to T4 with T the period of the sine 银行汇率、外汇汇率
wave. Using such a source in
a model may then have an influence on the behaviour of the simulation. Most submodels altering the
maximum time step indicate the change by a warning message.
Some source components contain some input ports. These allow some variable characteristics of the signal
generated by the source. For instance, a sine wave with variable frequency.
信号可以是连续的(正弦波…)或离散(方波……)。
注意,一些来源如正弦波SIN0使用减少自动解算器的最大时间步。例如,SIN0减少它4 T T的正弦波。在
模型中使用这样的来源可能会有影响的行为模拟。大多数子改变的最大时间步表明变化的警告消息。
一些源组件包含一些输入端口。这些允许一些变量的特点生成的信号来源。例如,一个正弦波变频。

Figure 3: source component having an input port

The sinks are used to terminate signal lines. Some sinks can play an important role like STOP0 which terminates
the simulation under certain conditions or SIGWRITE0 and SIGWRITE1 that write the value of the input signal to
an external ASCII file.
行汇用于终止信号。一些水槽可以发挥重要的作用像STOP0终止模拟在一定条件下或SIGWRITE0
SIGWRITE1,输入信号的值写入外部ASCII文件。

Figure 4: signal sinks
4. Maths
The Mathssub category contains components performing simple mathematical operations. These are compatible
with continuous and discrete signals.
4。数学
数学子类别包含组件执行简单的数学操作。这些都是与连续和离散信号兼容。

Figure 5: list of components allowing mathematical operations
Simple operations are addition, subtraction, multiplication(s), division… can be done by standard components,
but have also dynamic block equivalents, that can be applied on multiplexed signals.
简单的操作是加法,减法,乘法,除法…可以通过标准组件,但动态区块的等价物,也可以应用于多路信号。

Figure 6: icons of variable gain and multiplication blocks
The difference between the variable gain and the multiplication block resides in the constraints applied to
the gain by the variable gain: these constraints are set by the user in parameters mode and limit the
multiplication factor. Such a limitation does not exist in the multiplication component.
More complex operations like computing the mean value or constant moving average require internal state
variables.
可变增益之间的差异和乘法块位于约束应用于获得的可变增益:这些约束用户设定的参数模式和限制倍增

系数。这种限制并不存在于乘法组件。
更复杂的操作,比如计算平均值或不断移动平均需要内部状态变量。
5. Continuous
This sub category contains the components handling continuous-time state variables. These deal with analog
signal processing and can be used to model analog electronic systems.
5。连续
这个子目录包含的组件处理连续时间状态变量。这些处理模拟信号的处理,可以用来模拟电子系统模型。

Figure 7: signal continuous components
Their main characteristic comes from their icon reproducing their Laplace representation. For instance, the
integrator is represented by
他们的主要特点是从图标复制拉普拉斯表示。例如,积分器是由“k s”图标表示。

Figure 8: continuous time integrator
The most general blocks are the integrator, differentiator, state space formulation, and transfer function.
These are used to represent systems of differential equations.
The first order and second order lags correspond to particular forms of transfer functions commonly used
in control design.
The state space block allows the definition of a system in state space form:
最一般的块积分器、微分器状态空间配方和传递函数。这些都是用来表示系统的微分方程。
一阶和二阶滞后对应于特定形式的转移函数常用的控制设计。
状态空间块允许系统在状态空间形式的定义:
X'=A.X + B.U
Y=C.X + D.U
The continuous delay inserts a time delay between its input and output signals. Using a standard time
delay can perturb the linearization process since the link between the input and the output signals is not
direct.
To cope with such a problem, delay submodels using Padé approximants have been created, consisting
of a transfer function.

说话的是发动机所的所长吴力泉终于开口了。昨天哪怕是在汇报工作，也是让向大阳给介绍的，而今天，所长终于开始了他们的计划。 看着这个景象，卢峰的心中，就充满了干劲，虽然说伤筋动骨一百天，但是，在医院不可能呆这么久，大部分的养伤的时间，可以是在家里的。闲不住的卢峰，就到车间里面来了。 工厂里，比自己条件差的家庭还有不少呢，也没有见谁去闹啊，工厂里早就提前公示出来了，人家给的理由，让自己完全信服。 太贵重了。 那是涡轮增压器的外壳被高温炙烤的结果！ 打蛇打七寸，先从金永林入手！ 草原上天气黑的早，拆炉门一直拆到了半夜，用了七个小时，终于将三万多块耐火砖给拆开了。